Replacement flash tube for Rollei studio flashes
The modular and particularly maintenance -friendly structure of the new Rollei studio flash HS Freeze also allows the quick exchange of components outside of protected studio settings. The independence of stationary power sources and the high-performance battery, which can be interchangeable in a few simple steps, ensure that professional photographers can now choose their locations much more flexibly according to their personal ideas.
However, the corresponding framework conditions on the outdoor set are correspondingly challenging. In order to be able to continue the photo project even in the event of damage to individual elements, important parts such as the Flash tube of course also separately as Storage or spare part available. The High-performance flash tube Was developed especially for the HS Freeze and only fits into this flash innovation.
Our tip: STAD Several spare flash tubes to be prepared for all eventualities on the next outdoor or studio set.
Notes on changing the flash tube
Definitely switch off the flash to change lightning tubes beforehand and Disconnect the device from the power supply Or remove the battery. Wait until the protective bell and the flash tube are cold. The lightning tube may only be changed with a discharged device (lightning capacitors)!
Important: Under no circumstances touch the exposed electrodes of the flash tube, since the flash capacitors in the error trap, also at Switched off and separate flash unit separated from the power grid Or removed battery, still be charged and touch is life -threatening!
In any case, use clean and dry cotton or rubber gloves to change. Carefully pull off the protective bell. Wrap the Irrated ignition wire From the lightning tube holder and carefully pull the lamp out of the device. To use a new flash tube, Support the legs of the replacement tube without touching the metal contacts And carefully push them into the end position. Then wrap the ignition wire around the lightning tube holder again and put the protective bell on again.
Alternatively, the flash tube can also be made from our Blitz repair service have a fee.
Technical data
Available for: |
HS Freeze 6x, HS Freeze 4x, HS Freeze 2x, HS Freeze 4, HS Freeze 4S, HS Freeze 6, HS Freeze 6S, Studioblitz 400 |
Perfomance: |
400 W |
Color temperature: |
5500 K |
Material: |
Quartz glass |
Scope of delivery
- 1x replacement flash tube